
A Regency fireplace leaves the factory as a base unit configured with optional parts, so most appliance faults sit in those parts rather than the firebox. Chimney Sweep Port Moody repairs and replaces them one at a time, and leaves pilots, valves, and venting to the gas fireplace repair page.
The Grandview series was designed around choice, with more than 960 combinations of front, interior panel, and fire media. That design also makes it easy to update. A dated front can be replaced with a different style, and a brick interior can give way to reflective panels. A log set can be exchanged for another media kit as well, all on the same firebox and without touching the gas line.
Each change is ordered to the size, G600, G800, or G1200, and to the interior depth of that unit. Lead times on some fronts run several weeks, so we order before the visit rather than after, and the old front comes back with us for disposal. Media is laid exactly as the kit instructions show, because the burner was tuned for that layout. When a front is swapped, we check that the louver openings line up with the fan outlets. We also confirm that any Cool Wall air path above the unit is still open, since a blocked path sends heat into the wall where a television or artwork may hang.
On a Horizon the media is the whole look: the burner sits beneath a layer of glass crystals or spa stones, and the layer shapes every flame that appears. Over time the crystals collect a film from combustion and household dust, and stones shift when the glass is cleaned. We lift the media, wash and dry it, clear the burner ports beneath, and relay it to the depth and pattern the manual gives. Crystals that have chipped or clouded beyond cleaning are replaced as a kit, never topped up with a different product, since mixed media burns unevenly.
The Ultimate linear units use a complete log set instead, and their logs are reset on their locating points after every cleaning. On all of these, the ceramic glass is cleaned only when cool, with a product made for it, and the gasket is checked along each edge before the glass goes back. See-through models such as the HZ42STE get the same care on both faces. The safety screen is refitted on every face before anyone relights the unit, because a running unit's glass can scald a hand in seconds.
Across gas and wood units, six groups of Regency parts make up most of our repair work, each matched to the model code and, on gas units, to the control generation.
Interior panels - brick or reflective liners, replaced individually when cracked or chipped.
Fronts and louvers - swapped for a new style or replaced when dented or warped.
Media kits - logs, crystals, spa stones, or driftwood, always the kit listed for that burner.
Fans and lights - blower assemblies and accent lighting, controlled from the remote on Proflame II models.
Wood stove baffles and bricks - on Classic and Alterra stoves and the wood inserts, replaced as they crack or sag.
Gaskets - door, glass, and baffle seals on wood units; glass gaskets on gas units.
Photographing the rating plate and the worn part together lets us confirm the item before we order it.
Older Regency gas fireplaces and inserts, such as the Liberty and Panorama lines, are frequently still running well in Port Moody homes. When glass, gaskets, logs, and fans are available, repairing one is usually far cheaper than replacing it, and the firebox itself rarely fails. Wood stoves from the Classic line are similar: bricks, baffle, and gaskets bring an older stove back to clean burning.
On these older units we often find that a new log set, gasket, and fan bring back most of the original appearance and heat. Replacement becomes the sensible choice when the firebox has rusted, a glass assembly is no longer made, or the controls on a very old unit cannot be matched. We price both options side by side and let you decide, without steering you toward a new unit.
Every Regency Fireplace Repair Port Moody appointment opens with the unit cold. Gas models have their front and glass removed so we can look over panels and media, test fans and lights, and trace the Cool Wall path where one is fitted. Wood models get a close look at baffle, bricks, and gaskets, plus a sweep when the flue calls for one. Our technicians carry a gas licence and insurance, so anything found on the gas side can be handled during the same appointment.
Ring (778) 719-4866 to arrange fireplace repair, or use the contact us form to send the model code. Chimney Sweep Port Moody responds with an appointment and the parts list.